topic Re: Publishing website issue. in General Topics

Publishing website issue.

SamerKiwan — Wed, 06 Mar 2019 20:21:50 GMT

Hi Experts,

I am trying to publish a website, the webserver is behnid my Palo alto, i created NAT rule from public IP to be natted to the internal webserver IP address. What is starnge here is that i am not able to see my traffic when trying to reach the website from external. I was testing from my mobile so i put in Montior traffic tab source is my mobile public IP but couldnt find any logs:s.

Any suggestions?

Thanks,

Re: Publishing website issue.

BPry — Wed, 06 Mar 2019 21:48:18 GMT

@SamerKiwan ,

Can you post your NAT rule so we can see how you've actually configured it? During testing also ensure that you've overrode the default security rules and enabled logging so that you actually get logs generated if you hit the interzone-default security entry.

Re: Publishing website issue.

reaper — Thu, 07 Mar 2019 12:35:03 GMT

did you set your inbound NAT policy untrust to untrust, and your security policy untrust to dmz with the external IP as destination ?

Re: Publishing website issue.

Brandon_Wertz — Thu, 07 Mar 2019 21:01:46 GMT

If you're able to get to the site, but not actually see the traffic in your traffic logs then I'm guessing the source IP and the Webstie are in the same zone and you're not logging "intrazone" traffic.

Re: Publishing website issue.

SamerKiwan — Fri, 08 Mar 2019 11:45:08 GMT

Please find the NAT policy attached, and all my security policies are having logging enabled.

Re: Publishing website issue.

SamerKiwan — Fri, 08 Mar 2019 11:47:09 GMT

I tried all kinds of NAT policies and i tired the one you mentioned, but for some reason still no logs, maybe the issue is from public IP itself ? should i contact ISP to check with him?

Re: Publishing website issue.

SamerKiwan — Fri, 08 Mar 2019 11:48:53 GMT

No Brandon i am not able to reach the website from external, i can only from internal network.

Re: Publishing website issue.

nanukanu — Fri, 08 Mar 2019 14:14:35 GMT

Hi,

Why you don't create a rule from Outside to Outside with VIP as destination and DNAT of your internal IP? It must work.

How about you security rule? It is create Outside to Internal with VIP ip on destination field?

Regards,