topic Re: the show interface command in General Topics

the show interface command

Bittereinder — Fri, 05 Apr 2019 11:20:15 GMT

Hello!

I have a question regarding the show interface command.

When you enter for example "show interface ethernet1/3" to see the information of that interface, you can eventually see counters for receive errors or drops. Are these errors counted from the last time data plane was restarted?

And is there an option similar to "filter delta yes" for physical interfaces, as a way to "reset" those errors? "show interface ethernet1/3 filter delta yes" doesn't seem to work...

Thanks in advance!

Re: the show interface command

Raido_Rattameister — Fri, 05 Apr 2019 19:10:13 GMT

According to documentation:

"These are the interface counters from the time the data-plane started on the firewall. These counters can be cleared with a data-plane restart only."

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClWoCAK

Re: the show interface command

Bittereinder — Fri, 05 Apr 2019 20:01:34 GMT

Thanks for your answer, Raido, I suspected it but you've confirmed it.