topic Re: VRRP on switches connected to PA in active and passive mode in General Topics

VRRP on switches connected to PA in active and passive mode

MP18 — Sun, 14 Apr 2019 15:29:44 GMT

below we have setup

Where switches and routers are running ospf.

PA has static route to the VRRP IP of the switch.

1>>Need to know is this good design to have the VRRP backup router connected to the PA active switch?

2>>Also yesterday when we reboot the router 1 during that time we lost the internet connection

OtakarKlier — Mon, 15 Apr 2019 16:56:09 GMT

Hello,

We block online storage. Can you past your screen shot/diagram into the message body?

Please advise,

MP18 — Tue, 16 Apr 2019 23:37:29 GMT

here u go

OtakarKlier — Tue, 16 Apr 2019 16:16:49 GMT

Hello,

So from the diagram and my experience here are my replies:

1. I would swap the master and backup VRRP roles. This can be done with priorities.

2. Sounds like a routing issue in the switches/routers?

MP18 — Tue, 16 Apr 2019 17:26:17 GMT

you were spot on.