topic Re: HA Active-Passive , Node Pasive shows as Non-functional (Link down) in General Topics

HA Active-Passive , Node Pasive shows as Non-functional (Link down)

larry2019 — Wed, 29 May 2019 00:45:35 GMT

Hi guys ,

I made an HA configuration test but passive node is showing me as Non-functional (Link down).

Configuration Active FW

Configuration passive

Any suggestions please

Re: HA Active-Passive , Node Pasive shows as Non-functional (Link down)

reaper — Wed, 29 May 2019 09:02:41 GMT

- both device priorities are identical

- the backup HA1 peer IP has been configured to 20.20.20.2 but the interface is set to management and the management ip of the peer is 192.168.7.181

-HA2 dedicated link is set to transport mode ethernet, but the ha1 backup IP is configured: in transport mode ethernet, no IP is needed

Re: HA Active-Passive , Node Pasive shows as Non-functional (Link down)

larry2019 — Wed, 29 May 2019 17:20:59 GMT

Thanks dude

Made a bad configuration .

Thanks a lot

Re: HA Active-Passive , Node Pasive shows as Non-functional (Link down)

ShaunBeecroft — Tue, 13 Sep 2022 16:49:47 GMT

In the case of the 440's, the HA1 and HA2 have to have the same port, but different IP's as you might expect. Hard to distinguish this from other PA's, since they have the same port 'management'.

Re: HA Active-Passive , Node Pasive shows as Non-functional (Link down)

Incedo — Fri, 06 Oct 2023 07:02:56 GMT

Please check the HA monitor which interface you are added , may be you have added down interface in HA monitor that's why you are getting error.