topic split tunnel issue in General Topics

split tunnel issue

Jatin.Singh — Mon, 01 Jul 2019 04:00:43 GMT

I have set up a GlobalProtect gateway in Panorama (software version 9.0.0.0) and configured it for split tunnel, however the configuration is not applying to the firewall (PA850 - software version 8.1.6)

Re: split tunnel issue

S.Cantwell — Mon, 01 Jul 2019 17:11:40 GMT

When a commit is attempted, you will get messages about success, warnings, or failures.

Right now, we do not know any of this information.

Please attempt to push your configuration from the Panorama, but be logged into the FW that is not working.

At lower right corner, open tasks, and watch as config from Panorama is being pushed to FW.

Copy any error/warning messages.

Let us know if you do not see these messages, which would mean that Panorama is not speaking to FW.

Thanks.

Re: split tunnel issue

mope_itadel — Thu, 03 Oct 2019 08:17:51 GMT

We have seen the very same issue on quite a few of our customers.

The big issue is not that the split tunnel config is not pushed, but actually the Panorama pushes a blank split tunnel config to the firewall.

This causes quite a few issues if the policy set does not allow internet access from the GlobalProtect zone.