topic Re: Forticlient connecting but no traffic goes through in General Topics

Forticlient connecting but no traffic goes through

AGAGroup — Mon, 22 Jul 2019 18:09:01 GMT

Hello,

I am trying to use Forticlient to connect to a remote network outside our coporate network.

The connection is successfully established, it seems that the traffic is sent but no traffic gets received from the Forticlient.

Anything needs to be done on the PaloAlto to enable traffic reception?

Best regards

Re: Forticlient connecting but no traffic goes through

OtakarKlier — Mon, 22 Jul 2019 21:38:27 GMT

Hello,

Check the logs to make sure no traffic is getting blocked for this. Also check to see if your PAN is decrypting the traffic. Might need a special policy to allow the application and/or bypass decryption.

Regards,

Re: Forticlient connecting but no traffic goes through

AGAGroup — Tue, 23 Jul 2019 14:50:33 GMT

Hello,

I don't see any traffic being blocked in the logs... which I find weird.

The PAN is not configured to decrypt traffic so it's not related.

Thanks

Re: Forticlient connecting but no traffic goes through

jeremy.larsen — Tue, 23 Jul 2019 15:02:49 GMT

Are you logging traffic hitting the "Implicit Deny All Interzone" rule at the bottom of your ruleset?

Re: Forticlient connecting but no traffic goes through

AGAGroup — Tue, 23 Jul 2019 18:36:59 GMT

Yes and I don't see anything related to my problem in that log, whether I filter by source IP or Destination IP.