https://live.paloaltonetworks.com/t5/general-topics/source-and-destination-based-on-nat-using-dhcp/m-p/292755#M77439 <P>You can set up DDNS in the advanced tab of ethernet1/1, then create a FQDN address object you can use for NAT and security policy</P> Sun, 13 Oct 2019 20:58:12 GMT reaper 2019-10-13T20:58:12Z https://live.paloaltonetworks.com/t5/general-topics/source-and-destination-based-on-nat-using-dhcp/m-p/292727#M77437 <P>Hi,</P><P>&nbsp;</P><P>I am setting up a PAN device. On ethernet1/1 I have it set up to DHCP. I then will have a computer connected to ethernet1/9. I want to set up both source and destination based NAT. From what I understand in order to do this I would need to create an object. Is there any way to set up an IP based object that will be whatever the IP is that an interface got via DHCP?</P><P>&nbsp;</P><P>TIA.</P><P>&nbsp;</P><P>&nbsp;</P> Sun, 13 Oct 2019 14:08:26 GMT https://live.paloaltonetworks.com/t5/general-topics/source-and-destination-based-on-nat-using-dhcp/m-p/292727#M77437 golariu 2019-10-13T14:08:26Z https://live.paloaltonetworks.com/t5/general-topics/source-and-destination-based-on-nat-using-dhcp/m-p/292755#M77439 <P>You can set up DDNS in the advanced tab of ethernet1/1, then create a FQDN address object you can use for NAT and security policy</P> Sun, 13 Oct 2019 20:58:12 GMT https://live.paloaltonetworks.com/t5/general-topics/source-and-destination-based-on-nat-using-dhcp/m-p/292755#M77439 reaper 2019-10-13T20:58:12Z