topic Re: GUI only works with Incognito in General Topics

GUI only works with Incognito

Shawverr — Thu, 07 Nov 2019 13:28:50 GMT

Hello -

We replaced our palo last night and now the GUI will only open in Incognito mode in Chrome.

I tried clearing the cache. That didn't help.

Re: GUI only works with Incognito

BPry — Fri, 08 Nov 2019 03:48:52 GMT

Do you have any extensions in your browser that block ads or anything like that; uBlock Origin I know for sure will messes with the ability for the GUI to render.

Re: GUI only works with Incognito

Shawverr — Fri, 08 Nov 2019 14:08:15 GMT

@BPry Hey, thanks for replying. I don't think that's it because the other one in the pair works just fine. That being said, as I mentioned in the post, we just replaced this one and the config we used was the one from the palo in the pair. Because of that I think I know what the issue might be - It's using the cert from PA2.

What we had:

PA1

PA2

What died:

PA1

What we replaced:

PA1

The config we used on the new hardware:

PA2

That brought over the cert from PA2

I think that's what the problem is. If that fixes it I'll post here in case anyone else has the same issue at any point.

Re: GUI only works with Incognito

S.Cantwell — Fri, 08 Nov 2019 14:40:04 GMT

I have a question though.

If the FWs are in an HA pair (presumption) that the cert on PA1 and PA2 should have been the same.

When PA1 failed, and you copied the PA2 cert, it should have been identical to the original PA1 cert.

Confused.... 😛

Re: GUI only works with Incognito

Shawverr — Fri, 08 Nov 2019 15:15:23 GMT

@S.Cantwell Hey Steve -

I'll try my best to explain, I'm still not great at this stuff yet.

Device > Setup > Management > General Settings > SSL/TLS Service Profile

We have a "management" cert set up for each Palo in the pair. That cert has to be IP specific pointing to the IP of the Palo management interface.

Does that make sense or are you telling me I have something setup wrong? Eeeeek!

Re: GUI only works with Incognito

S.Cantwell — Fri, 08 Nov 2019 17:32:26 GMT

Hello again.

Makes sense now what you are saying.

But I do not see this as part of the FW causing your overall issue, but if you think it is the wrong cert, then the browser should balk at it, and give you a untrusted cert error splash page... or similar...

You may want to double check and verify.

Let us know.

steve

Re: GUI only works with Incognito

Shawverr — Fri, 08 Nov 2019 18:55:25 GMT

@S.Cantwell

That did fix the issue. Not sure why exactly, but when I fixed the cert it came up in chrome with no issues.

I appreciate your time! Thanks again.