topic Re: Panorama software upgrade disk space issue in General Topics

Panorama software upgrade disk space issue

raji_toor — Tue, 18 Feb 2020 19:59:56 GMT

I am getting following error when trying to download firmware in Panorama VM.

Error: There is not enough free disk space to complete the desired operation. Delete older software, dynamic update, or client versions to free additional disk space before trying the operation again. Use the 'set max-num-images count' CLI command to adjust the number of versions stored in order to avoid this problem in the future.

As per the error message i tried to run the command but it still didn't work out

adm> set max-num-images count 7 Warning; config partition size 7.88 GB may be too small on your system to keep 7 images. Recommend keeping 2 to 5 images adm> set max-num-images count 5 Maximum number of images to keep is set to 5 adm> show system disk-space Filesystem Size Used Avail Use% Mounted on /dev/sda2 3.8G 3.1G 534M 86% / /dev/sda5 7.6G 6.5G 653M 92% /opt/pancfg /dev/sda6 3.8G 1.3G 2.3G 37% /opt/panrepo tmpfs 1.9G 110M 1.8G 6% /dev/shm cgroup_root 1.9G 0 1.9G 0% /cgroup /dev/sdb1 1008G 615G 342G 65% /opt/panlogs

Re: Panorama software upgrade disk space issue

BPry — Wed, 19 Feb 2020 03:59:47 GMT

@raji_toor,

Just slim down the number of images that you are maintaining; personally I only keep the last image that was installed and obviously the current image that I'm running.

Essentially you only have a few options. Cutdown the number of images you have saved, or allocate more space so you can maintain all of the images you actually want. I would say that cutting down the number of images you maintain is likely the better option.

Re: Panorama software upgrade disk space issue

Abdul_Razaq — Wed, 19 Feb 2020 11:24:45 GMT

Hi @raji_toor ,

As @BPry mensioned, you need to keep only the current image and the base image in the box. rest you can delete and free up for making room for the image file(and its base) you are going to upgrade.

Re: Panorama software upgrade disk space issue

raji_toor — Wed, 19 Feb 2020 20:31:45 GMT

@BPry and @Abdul_Razaq I have only 2 images in there 8.1.0 and 8.18h5 and i still get the same error message. How can i do further cleanup to make space and for what partition.

Re: Panorama software upgrade disk space issue

BPry — Wed, 19 Feb 2020 22:06:01 GMT

@raji_toor,

So if that isn't it, look at what your Config log quota is currently set to and modify the retention period as necessary; you likely don't have any need to keep the default value of 365. Another thing that could be cutting into this is the number of configuration versions you are keeping; depending on the size of your configuration and the number of versions you maintain, this can add up relatively quickly.

Re: Panorama software upgrade disk space issue

Abdul_Razaq — Thu, 20 Feb 2020 05:20:31 GMT

Hi @raji_toor ,

As of my understanding, the image downloaded directly into the panorama and 'upload manually/SCP copied' will go to different partitions. You can try to clear root partition by clearing old logs if you don't want it. and try using direct download or manual upload or SCP copy. As these are going to different partitions, any of the methods might help you.

Re: Panorama software upgrade disk space issue

GerritM_OTX — Fri, 14 Oct 2022 11:54:14 GMT

topics of interest

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PN4dCAG

https://docs.paloaltonetworks.com/panorama/9-1/panorama-admin/set-up-panorama/set-up-the-panorama-virtual-appliance/increase-the-system-disk-on-the-panorama-virtual-appliancehttps://docs.paloaltonetworks.com/panorama/9-1/panorama-admin/set-up-panorama/set-up-the-panorama-virtual-appliance/increase-the-system-disk-on-the-panorama-virtual-appliance/increase-the-system-disk-for-panorama-on-an-esxi-server#id27229f7c-6701-4fef-9ad7-cb630ea5cbcb