topic Re: 9.0.0 or 9.0.6 from 8.1.8 in General Topics

9.0.0 or 9.0.6 from 8.1.8

abdulhakam — Tue, 25 Feb 2020 11:42:13 GMT

Current running version 8.1.8, so can upgrade version 9.0.6 or need to upgrade version 9.0.0 first.?
Model PA-220.

Pls advise

Re: 9.0.0 or 9.0.6 from 8.1.8

SutareMayur — Tue, 25 Feb 2020 12:40:38 GMT

No need to upgrade to 9.0.0, you can directly jump to 9.0.6. Only thing is, keep base version 9.0.0 downloaded on the gateway. Then you are good to go to 9.0.6.

Hope it helps!

Mayur

Re: 9.0.0 or 9.0.6 from 8.1.8

BPry — Wed, 26 Feb 2020 03:20:04 GMT

@abdulhakam,

I would follow this model.

Download and install the latest maintenance release.
1. Restart
Download and install 9.0.0
1. Do NOT restart.
Download and install 9.0.6
1. Restart

This prevents the PA-220 from having to explode both 9.0.0 and 9.0.6 to disk and build a working install image for 9.0.6 from the bits and pieces included in the base image and the target maintenance release.

Re: 9.0.0 or 9.0.6 from 8.1.8

abdulhakam — Mon, 02 Mar 2020 04:47:27 GMT

Hi,

@BPry

U mention:

Download and install the latest maintenance release.
1. Restart

It meant, if latest version is 9.0.6 download and install and also restart.

But u mention too:

2. Download and install 9.0.0

Do NOT restart.

3. Download and install 9.0.6

Restart.

If I download,install and restart for step number 1. so i can skip step number 2 and 3 right.?

Or any details step do doing upgrade from 8.1.X to 9.0.6.?

Thanks?

Re: 9.0.0 or 9.0.6 from 8.1.8

abdulhakam — Mon, 02 Mar 2020 04:50:17 GMT

Hi @SutareMayur ,

What yr meant keep base version 9.0.0 downloaded on the gateway. ?

It meant just download and install 9.0.0 but not restart and download version 9.0.6 and install also restart right.?

Thanks

Re: 9.0.0 or 9.0.6 from 8.1.8

SutareMayur — Mon, 02 Mar 2020 04:55:54 GMT

@abdulhakam No need to install 9.0.0, just keep it downloaded on the firewall. Then download target version and install it.

It is recommended path when moving from one feature release to the next is to download the base image for the next feature release version and then download and install your target maintenance release version. You must have both the base image and the maintenance release image on the firewall for installation to be successful.

Hope it clarifies your queries.

Mayur

Re: 9.0.0 or 9.0.6 from 8.1.8

BPry — Mon, 02 Mar 2020 05:00:27 GMT

@abdulhakam,

Your upgrade path would look like the following:

1) Download and install 8.1.13

- Restart

2) Download and install 9.0.0

- Do NOT restart.

3) Download and install 9.0.6

- Restart

It's always best to be on the latest maintenance release of your current code branch before doing a major upgrade, so in this case for you that would be 8.1.13. The base image should be installed so the system doesn't have to explode two images onto disk to build a working installer, but you don't need to restart and switch the active partition until you install 9.0.6 which is the target release in your upgrade path.

Re: 9.0.0 or 9.0.6 from 8.1.8

Vikashh — Mon, 02 Mar 2020 05:06:50 GMT

@BPry Is it really required to install 9.0.0 base version in this upgrade path ? I think it is enough to keep base version downloaded on the gateway.

I did several upgrades in this way only.

I am not opposing you but just quite curious about it.

Re: 9.0.0 or 9.0.6 from 8.1.8

BPry — Mon, 02 Mar 2020 05:18:05 GMT

@Vikashh,

It's not required, it simply prevents the firewall from having to explode both the 9.0.0 and 9.0.6 images onto disk and building the actual install image from both images. Some older models have issues with building a proper install image due to disk limitations, and this upgrade procedure prevents that from being as big of an issue as the firewall can properly calculate disk requirements individually ensuring at the onset that it'll have enough disk space.

If you know that you have enough available disk space so the firewall can build a proper install image without space constraints, then you don't need to install the base image at all. However, since we have no idea what the OPs equipment actually looks like I'm always going to provide the upgrade procedure that poses the least amount of risk regardless of environment.

Re: 9.0.0 or 9.0.6 from 8.1.8

LeeConybear — Tue, 02 Feb 2021 20:24:00 GMT

Hi guys,

Having just done 8.1.9 to 9.1.6, we had no choice but to:

download 9.0.0 install and reboot

download 9.0.11 install and reboot

download 9.1.0 install and reboot

download 9.1.6 install and reboot

(although we actually transferred directly to the fwl via the 'upload'

That was our only option as the system requested a reboot at each point.

Timing wasn't too bad though:

8mins to transfer 9.0.0

3mins to install 9.0.0

12mins to reboot and wait until it's done 2 Auto Commits (via the Task section in GUI or show jobs all via CLI)

4mins to transfer 9.0.11

3mins to install 9.0.11

5mins to reboot and wait until it's done 2 Auto Commits (via the Task section in GUI or show jobs all via CLI)

Then pretty much the same to do 9.1.0 and 9.1.6