topic Re: upgrading from PA-3020 to PA-3220 HA2 error in General Topics

upgrading from PA-3020 to PA-3220 HA2 error

brookscampbell — Mon, 16 Mar 2020 15:55:56 GMT

Trying to upgrade from a PA 3020 to a PA 3220 but when we import the running state from the PA 3020 and then click commit we get this error. Validation Error:
deviceconfig -> high-availability -> interface -> ha2 -> link-speed unexpected here
deviceconfig -> high-availability -> interface -> ha2 is invalid

I have edited the XML so that there is no reference to HA2 but it still gives the error. On the new 3220's there is a HSCI port for HA2 that does not need the link-speed setting.

Has anyone run into this and what was your solution?

Re: upgrading from PA-3020 to PA-3220 HA2 error

S.Cantwell — Mon, 16 Mar 2020 17:54:02 GMT

I would agree that you are doing the only thing possible, which is to modify the xml code.

If you are getting a validation error after removing references to HA2, then I would try to see how the 3220 references when you use the HSCI and see what syntax you can use.

Only other option (if it was me) was to remove ALL references to HA config completely from the 3000 series xml file, validate, and then re-create the HA config on the 3220, after importing (and validating)

Good luck, I think you are in the right place and steps seem correct.

Re: upgrading from PA-3020 to PA-3220 HA2 error

brookscampbell — Tue, 24 Mar 2020 15:09:09 GMT

Modified the running-config XML file and still received the same error message. Found a template XML in the system state files and it also had references to the interfaces. Modified both files and config was properly committed.

Re: upgrading from PA-3020 to PA-3220 HA2 error

Retired Member — Mon, 20 Apr 2020 15:16:05 GMT

I was doing the same upgrade from a 5020 to a 5250 and was receiving the same error about HA2 -

deviceconfig -> high-availability -> interface -> ha2 -> link-speed unexpected here

deviceconfig -> high-availability -> interface -> ha2 is invalid

Since my commit was failing, I went into the CLI and ran - show deviceconfig high-availability interface ha2

I could see the link-speed and link-duplex were both auto.

So I just ran the delete command on HA2 to clear out those settings - delete deviceconfig high-availability interface ha2

Then was able to add my config back to HA2 and commit successfully.

Re: upgrading from PA-3020 to PA-3220 HA2 error

brookscampbell — Mon, 20 Apr 2020 17:16:16 GMT

Hi Samtec-Matt

That was easier then going through the XML files and finding the references. I have two more to do yet and will try this instead.

Re: upgrading from PA-3020 to PA-3220 HA2 error

FabioAlmeida — Mon, 29 Jun 2020 11:39:22 GMT

FYI, delete the ha2 via CLI worked for me.

Re: upgrading from PA-3020 to PA-3220 HA2 error

rds-r2d2 — Thu, 03 Dec 2020 16:05:54 GMT

Updating Device State XML's worked for me. Had the same issue going from 5060 to 5260. CLI didn't work and neither did editing the running-config.xml. Due to Panorama templates in place I had to edit the xml's in the template folder too within the device state zip.

Re: upgrading from PA-3020 to PA-3220 HA2 error

fatboy1607 — Mon, 12 Apr 2021 10:49:24 GMT

Thanks that did worked for us.

Re: upgrading from PA-3020 to PA-3220 HA2 error

Shahbaz — Wed, 23 Jun 2021 00:14:25 GMT

worked !!!!

Re: upgrading from PA-3020 to PA-3220 HA2 error

jareed — Sat, 14 Aug 2021 17:13:26 GMT

Dang it Matt Samtec.....your post just saved me....thanks for posting this....Got me past it and the config moved over 5050 to 5260....Jay

Re: upgrading from PA-3020 to PA-3220 HA2 error

sokonta — Thu, 18 Nov 2021 02:27:57 GMT

Hi Guys,

I have the same issue going from 3020 to 3220 however, the 3020 are managed by Panorama. Do you unzip the device_state_cfg file ?

1. Also what Part of the XML script do you remove from running-config ?

2. Also what Part of the XML script do you remove from template-config ?

Thanks

Sokonta

Re: upgrading from PA-3020 to PA-3220 HA2 error

sokonta — Thu, 18 Nov 2021 18:43:00 GMT

Can someone please confirm if the lines below are what you need to delete from the 3 .xml files for HA2 and HA1 as show below..

running-config.xml

pretrans-template-config.xml

template-config.xml

<ha2>

<ha1>

<port>dedicated-ha1</port>

Any responses will be appreciated.

Re: upgrading from PA-3020 to PA-3220 HA2 error

StuartSharp — Thu, 16 Feb 2023 16:12:13 GMT

Hi, I am running into this issue. How can I edit the device state .xml file when it is packaged as a .tgz?