topic Re: How to replace one Faulty Paloalto 3250 version 8.1.6 Firewall which is in General Topics

How to replace one Faulty Paloalto 3250 version 8.1.6 Firewall which is in HA.

JyotiPrakash — Fri, 14 Feb 2020 19:20:27 GMT

Hi All,

I need help on how to replace one Faulty Paloalto 3250 firewall PAN OS version 8.1.6 which is in HA and policies are managed through Panorama.

your help is highly appreciated and thank you so much.

thnx

Re: How to replace one Faulty Paloalto 3250 version 8.1.6 Firewall which is in HA.

JoergSchuetter — Fri, 14 Feb 2020 20:17:30 GMT

Hello

I would do the following:

- remove the faulty box

- configure the new device to make it reachable by panorama (only connect management interface)

- complete config of node (if there is anything done local)

- make sure you have link monitoring configured

- assign the template and device group to the new device (serial number)

- download updates

- push config from panorama

- interconnect all HA cables

- the new box is expected to stay passive/failed since not all interfaces are connected (see link monitoring)

- ensure the sync between the nodes is working

- connect the remaining cables (if you have adjusted service routes using something different than default, connect the cable to the interface(s) used for service route, but keep at least one disconnected which is listed in link monitoring)

- suspending the new device might have the same result, but this does not survive a reboot

Re: How to replace one Faulty Paloalto 3250 version 8.1.6 Firewall which is in HA.

kgopichand — Sat, 15 Feb 2020 04:01:30 GMT

Hello JP

This document should help answer your question.

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClHFCA0

If you have any further questions after following this document , please open a support ticket.

Kavi

Re: How to replace one Faulty Paloalto 3250 version 8.1.6 Firewall which is

JyotiPrakash — Mon, 04 May 2020 19:52:32 GMT

Thank you so much for your help. I will go through the KB article and hope this may help. Appreciate your help!!