Can't connect firewall to network

c_n0te — Thu, 14 May 2020 23:13:08 GMT

I'm trying to setup a PA-220 for the first time. I'm able to access the fw via the web interface when I directly connect my laptop to the mgmt port.

I'm stuck on Step 11 (https://docs.paloaltonetworks.com/pan-os/9-0/pan-os-admin/getting-started/integrate-the-firewall-into-your-management-network/perform-initial-configuration).

I am not able to connect the fw to the network (step 11 in the link above). I ran a ethernet cable from the mgt port to a port on my Ubiquiti switch as it says and verified the port on the switch is set to auto negotiate. When I try to connect via ssh it just times out.

Re: Can't connect firewall to network

Abdul_Razaq — Fri, 15 May 2020 17:00:39 GMT

Hi @c_n0te ,

Hope you have followed previous steps and configured new IP address and the commit were successfull.

If you have permitted IPs configured, make sure your PC IP is permitted and service (https, ssh etc..) are allowed

topic Can't connect firewall to network in General Topics

Can't connect firewall to network

Re: Can't connect firewall to network