topic M200 raid disk pair status stucked at 0% in General Topics

M200 raid disk pair status stucked at 0%

Deepak_K — Wed, 10 Feb 2021 15:11:45 GMT

To enable the disk A ,we have run the below command

request system raid add A1
and after 5 min run below command :
request system raid add A2

But disk is not enabled. Status is stuck at 0% since last 6 hours.

How we can resolve this issue ?

jdelio — Thu, 11 Feb 2021 18:09:18 GMT

I am curious if there has been any change.

I am also assuming this was a new setup?

Deepak_K — Fri, 19 Feb 2021 05:52:15 GMT

Yes , this is a new setup.

Now status is completed. It took 24 hours build disk pair A.