M500 Disk Pair Raid status changes between active and clean

ChrisIsett — Wed, 10 Mar 2021 17:30:14 GMT

If I execute the command 'show system raid detail' on my m500 log servers I see the status of the disk pair toggling between active and clean. I am wondering why it would doe this. Is this normal?

admin@LOG01> show system raid detail

Disk Pair A Available
Status active
Disk id A1 Present
model : ST2000NX0253
size : 1907729 MB
status : active sync
Disk id A2 Present
model : ST2000NX0253
size : 1907729 MB
status : active sync

admin@LOG01> show system raid detail

Disk Pair A Available
Status clean
Disk id A1 Present
model : ST2000NX0253
size : 1907729 MB
status : active sync
Disk id A2 Present
model : ST2000NX0253
size : 1907729 MB
status : active sync

Re: M500 Disk Pair Raid status changes between active and clean

kiwi — Thu, 18 Mar 2021 11:45:01 GMT

Hi @ChrisIsett ,

I don't think you need to worry about this.

Both are normal operation states and I wouldn't worry unless you see something like inactive or failed state.

Cheers,

-Kiwi.

topic M500 Disk Pair Raid status changes between active and clean in General Topics

M500 Disk Pair Raid status changes between active and clean

Re: M500 Disk Pair Raid status changes between active and clean