Local Checks Not Enabled (info)

ShaileshKumbhar — Fri, 19 Mar 2021 17:42:06 GMT

As per VAPT done at our firewall found below vulnerability :

Please suggest any solution

=====================================================================================

Local checks were not enabled.

Scanner did not enable local checks on the remote host. This does not necessarily indicate a problem with the scan. Credentials may not have been provided, local checks may not be available for the target, the target may not have been identified, or another issue may have occurred that prevented local checks from being enabled. See plugin output for details. This plugin reports informational findings related to local checks not being enabled. For failure information, see plugin 21745 : 'Authentication Failure - Local Checks Not Run'.

Solution: n/a

Refer:

Scan Output:
The following issues were reported :

- Plugin : no_local_checks_credentials.nasl
Plugin ID : 110723
Plugin Name : Target Credential Status by Authentication Protocol - No Credentials Provided
Message :
Credentials were not provided for detected SSH service.

=====================

Re: Local Checks Not Enabled (info)

BPry — Sun, 21 Mar 2021 02:59:51 GMT

@ShaileshKumbhar,

Good? It's just telling you that you didn't provide SSH credentials for the firewall and therefore it wasn't able to attempt to login, identify the OS, and attempt to run any local checks. That's not any sort of vulnerability or anything outside of the fact that it suggests you don't have your management access restricted like you should.

topic Local Checks Not Enabled (info) in General Topics

Local Checks Not Enabled (info)

Re: Local Checks Not Enabled (info)