LED's on startup

TSgtAllebone — Mon, 24 May 2021 06:52:38 GMT

Recently migrate to a pair of 3200 series firewalls. Everything was fine and dandy until we powered them down to migrate to the correct rack. Once we powered them up, one came up fine, but the other has a green power light and nothing else. the fans are going crazy like it's trying to come up, but stays like that. Tried consoling in upon bootup, but nothing shows. I tested the console method on the working one and it's working fine.

Much appreciated!

Re: LED's on startup

Remo — Mon, 24 May 2021 14:18:02 GMT

Hi @TSgtAllebone

How long didi you wait until something useful was shown on the console? Did you check console output right from the then when the device was powered on? I assume you tried already to start the device again (pull out the power cable, wait a few seconds and plug it in again)? If this does not help, I assume - unfortunately - you need to contact support for an RMA.

topic Re: LED's on startup in General Topics

LED's on startup

Re: LED's on startup