Incoming traffic being not logged on external IP

DarrenRees — Mon, 14 Jun 2021 17:10:09 GMT

Any help greatly appreciated.

I have 4 internal IPs w x y and z that need to route out on one of my external IPs (1.2.3.4). And then I need the ingress traffic on 1.2.3.4 to be routed to w x y and z based on the incoming port number. I am also changing the incoming port to a standard internal port number.

The out going NAT rule seems to fine. However the incoming 4 NAT rules are not being hit and I don't see any traffic at all on the monitor for ext IP 1.2.3.4, but I am assured by the sender it is being sent.

I have done bidirectional static NATs before and not had an issue, but the routing by port number is not working.

thanks

Alex

Re: Incoming traffic being not logged on external IP

OtakarKlier — Mon, 14 Jun 2021 20:38:42 GMT

Hello,

You should see the traffic in the logs when the security policy is hit. Just verify that the policy is set to log at session end. Log at session start is a short term settings.

Regards,

topic Re: Incoming traffic being not logged on external IP in General Topics

Incoming traffic being not logged on external IP

Re: Incoming traffic being not logged on external IP