topic Re: One session is utilizing 5-12% of CPU of my 5220 firewall in General Topics

One session is utilizing 5-12% of CPU of my 5220 firewall

NijithPN — Sat, 06 Jun 2020 20:57:55 GMT

One session is utilizing 5-12% of CPU of my 5220 firewall.

Session ID: 2155872259

show session id 2155872259

Session 2155872259

Bad Key: c2s: 'c2s'
Bad Key: s2c: 's2c'
index(local): : 8388611

I am not able to check the session information. Getting bad Key error.

This session causing me extra 5-12 CPU utilazation. I tried clear the session but still its comming back.

Re: One session is utilizing 5-12% of CPU of my 5220 firewall

skumar1 — Fri, 26 Jun 2020 14:28:32 GMT

Since it is in the Slowpath stage, it has the session ID generated in the ingress-backlogs command but this is NOT searchable with CLI command ‘show session id id’ and will always give the error message below:

Bad Key: c2s: 'c2s'
Bad Key: s2c: 's2c'
index(local): : index number

This is of course because the session is not fully established and has not generated a session ID.

When investigating the ingress-backlogs command for spikes in traffic that cause latency or outages, finding the offender can be crucial in knowing the resolution path to take

Seeing a large amount of sessions that are in Group-ID 2 Slowpath stage lets you know that it is not currently being allowed, but may be generating large amounts of information which are impacting your buffers

Hope that answers your question.

Cheers!

Suresh

Re: One session is utilizing 5-12% of CPU of my 5220 firewall

crajariyap — Mon, 23 Nov 2020 11:33:11 GMT

Some points to add here:

1. Whenever you run "show running resource-monitor ingress-backlogs" and if you notice "Bad Key" error, not all of them mean that they are related to slow path traffic.

2. The reason why you might see a "Bad Key" error in general is that the identified tag/key value is not actually a session id.

3. One of the important give aways to identify if it is an actual session id or not is, the value of the key/session id displayed would be greater than the total number of sessions that slot or device can support.

Example in this case the FW is PA-5220.

max-session supported : 4194302

session-id or key value seen in the output.

Session ID: 2155872259

This clearly would not. be a session id.

4. The Group ID (GRP-ID) is important. If and only if GRP-ID is "2" or GRP-ID is "16"; we can conclude that it is due to slowpath traffic.

In slow path there is no session installed and the value is usually an internally calculated hash value.

Re: One session is utilizing 5-12% of CPU of my 5220 firewall

Siva_Balimidi — Fri, 01 Oct 2021 19:57:10 GMT

what is the resolution for this issue?

can anyone suggest? right now we are facing the same.