Processor not pulling from Miner

Eddie_Brown — Mon, 05 Nov 2018 17:21:49 GMT

Hello Folks,

I recently created a new miner to pull domains from a threat intel provider. I can see the Miner is pulling the expected amount of domains. However, my associated processor is not pulling anything from the miner.

I've already looked the the obvious things: like is Output enabled on my miner etc.

I can see in the logs that the processor is recvd_update however it immediately drop_update right after for all 10,000 indicators.

is there a log file on the console I can see DROP reasoning from a processor perspective?

Any suggestions would be appreicated.

snipping of the log page, edited for confidentiality:

Thanks,
Eddie

Re: Processor not pulling from Miner

Eddie_Brown — Tue, 06 Nov 2018 17:24:37 GMT

I have fixed this issue. The problem was in my miner under attributes section, under the type attribute I had "Domain" instead of "domain". Should've known Pythin and Linux is case sensitive.

I rebuild the miner with the correct attribute and viola, it works!

topic Processor not pulling from Miner in General Topics

Processor not pulling from Miner

Re: Processor not pulling from Miner