topic Re: Missing add button config tab in General Topics

Missing add button config tab

kevin_thys — Fri, 25 Nov 2016 10:42:09 GMT

Hi,

I don't see any add button anymore on the config tab.

Re: Missing add button config tab

lmori — Fri, 25 Nov 2016 11:59:41 GMT

you can enable the Add button again by clicking on the "eye" icon in the bottom left of the table (this enables "expert mode").

Or you can add nodes by clicking on the hamburger icon, selecting a prototype and then click on "CLONE".

Re: Missing add button config tab

kevin_thys — Mon, 28 Nov 2016 09:03:10 GMT

Hi,

Having the add sign by default would be usefull when setting up the configuration.

Re: Missing add button config tab

lmori — Tue, 29 Nov 2016 08:54:09 GMT

Hi @kevin_thys,

you can add nodes by clicking on the hamburger icon, selecting the prototype and then clicking on CLONE.

While the add button is more straightforward when you already know the proto you'd like to use, going thru the prototype library gives more insights about each prototype.

In the next release (0.9.30) the prototype library will also show information about indicators, share level and confidence level of each prototype. Thanks for the suggestion !