topic Re: one trust two untrust in General Topics

one trust two untrust

Soporte.Arteria — Wed, 18 Sep 2013 19:18:13 GMT

If I have two DSL connections, and 10 network segments, is possible configure on a PAN firewall one "trust" zone, tow "untrust" zone and send five segments for each one?

Re: one trust two untrust

shasnain — Wed, 18 Sep 2013 19:25:14 GMT

The PA firewall does not do load balance. You can do a redundant link setup. You can use PBF for that.

Configuring Policy Based Forwarding (PBF)

Thanks,

Syed R Hasnain

Re: one trust two untrust

shasnain — Wed, 18 Sep 2013 19:27:56 GMT

How to Configure ISP Redundancy and Load Balancing

Thanks,

Syed R Hasnain

Re: one trust two untrust

HULK — Wed, 18 Sep 2013 19:54:49 GMT

Hello Simon,

From your post , it's looking like you want a setup like below mentioned diagram.

Then, please follow the above document mentioned by Shasnain. https://live.paloaltonetworks.com/docs/DOC-3579

Note: make sure there are no asymmetric-routing happening between 2 ISP links.

Hope this helps.

Thanks