topic Re: Support for static local IP and Domain Lists in General Topics

Support for static local IP and Domain Lists

nbilal — Thu, 28 Apr 2016 12:50:16 GMT

I'd like to start by saying, that this is an amazing tool! Thanks for sharing this, it has great potential and my customer is excited. One question: is there currently any support for creating and maintaining local IP and domain blocklists on the MineMeld? Instead of setting up a miner to go out and consume a feed, we'd like to be able to create and modify a static list locally, then publish it to firewalls as an EDL or DAG like other MineMeld outputs.

If this is already supported, how would I go about configuring it? If not, is it something we could add?

Thanks!

Nasir

Re: Support for static local IP and Domain Lists

lmori — Thu, 28 Apr 2016 13:01:28 GMT

Hi Nasil,

this is supported already. Just create a node based on stdlib.listDomainGeneric prototype to manage a static list of domains. For IPv4 you can use stdlib.listIPv4Generic, for IPv6 stdlib.listIPv6Generic.

DON'T USE NAME WITH PREFIX "wl" OTHERWISE THE AGGREGATOR WILL USE THE LIST AS WHITELISTS !

HTH,

Luigi

Re: Support for static local IP and Domain Lists

nbilal — Thu, 28 Apr 2016 14:06:11 GMT

Thanks Luigi! That worked. It's interesting though, I had to use a Miner > Processor > Output. When I tried to use Miner > Output, the output would process and "withdraw" all of the indicators from the Miner. So are all three components required? I thought that it would be possible to point a Miner right at an Output.

Re: Support for static local IP and Domain Lists

lmori — Thu, 28 Apr 2016 22:17:31 GMT

Hi Nasil,

do you remember which Output prototype did you use for the Miner > Output test ?

luigi

Re: Support for static local IP and Domain Lists

nbilal — Mon, 02 May 2016 14:36:15 GMT

I was using "Class = minemeld.ft.redis.RedisSet" and "Prototype = stdlib.feedHCGreen".

However, I found out the reason they were being withdrawn - I wasn't setting the "Share Level" of the indicators to Green (it was left blank). After deleting those indicators and adding them in with a share level, they show up even in the Miner > Output scenario. Thanks for your support!