Expedition - No supported files to process

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Expedition - No supported files to process

L1 Bithead

Hi all,

I have the issue that imported logs from firewall on 8.1.X release can't be processed in Expedition.

I already changed the permissions of PALogs to anything possible. Also chmod 777 PALogs/.

 

Files are imported correctly but can't be processed at this point.

Screenshot 2019-03-01 at 10.27.21.png

 

Any ideas what to try next?

 

BR

tisc

1 accepted solution

Accepted Solutions

L1 Bithead

Hi all,

 

I found the issue. It's no permission issue. I imported logs from a specific firewall into expedition. Below connected devices I had my Panorama and all other firewalls. I made the mistake to select the Panorama while trying to parse these specific firewall logs.

 

So basically I just needed to select the correct firewall and click on process again. After that you can create a project and jump into panorama config to use the machinelearning to improve the panorama rulebase from this specific firewall.

 

thnks all

View solution in original post

4 REPLIES 4

Community Team Member

@tisc ,

 

Moving this to the Expedition discussions.

 

Cheers,

-Kiwi.

 
LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

L5 Sessionator

you'll need to set the below permissions and ownership

 

$sudo chown www-data /home/expedition/PALogs

$sudo chmod +x /home/expedition/PALogs

L1 Bithead

Hi all,

 

I found the issue. It's no permission issue. I imported logs from a specific firewall into expedition. Below connected devices I had my Panorama and all other firewalls. I made the mistake to select the Panorama while trying to parse these specific firewall logs.

 

So basically I just needed to select the correct firewall and click on process again. After that you can create a project and jump into panorama config to use the machinelearning to improve the panorama rulebase from this specific firewall.

 

thnks all

same issue and resolution. If you add panorama as a device under 'improted devices' you will need to remove it and add any firewalls individually (says serial number taken otherwise). 

  • 1 accepted solution
  • 5813 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!