AD Integration not working after upgrade to 8.1

Reply
Highlighted
L1 Bithead

AD Integration not working after upgrade to 8.1

I recently updated to 8.1 from 8.0.8 on one of my PA-220s. My UserID isn't working any more. I can't login with AD creds either. When I go to the User Identification area the Server Monitoring says "Not connected" This is my secondary device in my HA pair. The primary is still on 8.0.8. I'm not sure where to look to start troubleshooting. Any thoughts?

Tags (2)
L7 Applicator

Re: AD Integration not working after upgrade to 8.1

not sure if you are having issues with 8.1 but regardless of version you just need to confirm if user-id service is using the management port under device/setup/services/service route.

 

if you are not using management port then uid will fail as interface will be down in active/passive secondary.

L1 Bithead

Re: AD Integration not working after upgrade to 8.1

I have it set to "Use Management Interface for All." Everything was working before I did the upgrade.

L7 Applicator

Re: AD Integration not working after upgrade to 8.1

@DecagonIT,

Can you verify that you can actually reach the secondary device on it's management interface? 

L1 Bithead

Re: AD Integration not working after upgrade to 8.1

I'm logged in to the web interface on the management IP and I can SSH in. I also did a ping to one of the DCs from the management IP source and was successful.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!