Good day All
i had read all the possible solution to this issue, but still presenting the same symphtom, i have applied all solutions mentioned on all posts.
does anyone had or did something different?
thanks in advance.
No, i don't have a NAT, because we use PA as webfilter, the main link is connected to another firewall and from there we connect to the PA.
the 'front' firewall is mainly to block external sites/attacks.
this looks like routing issue , palo alto identify application once it completes TCP 3 way handshake following data sent by server have any application data to perform pattern matching using signatures or for following destination cached entry is already stored in using APP ID cache.
You can try to filter using only destination IP and can see if application is identified earlier.
Run packet capture on firewall between source and destination to look for more detail.
Yes, PCAP at this point is the way to go. Most likely:
* SYN/ACK packet is never received by Palo or
* SYN/ACK packet is received by Palo but it does not know how to route that packet back to the destination
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!