Hello- I am reading through the docs on ActiveActive HA and floating IP. The diagrams show that for intf A there is a10.1.1.253 address on the Active-Primary intf and a 10.1.1.252 on Active Secondary.
My question is, how do I configure the different address and ensure its tied to the Active-secondary.
thank you in advance,
Solved! Go to Solution.
HA Active-Active between PANA (Dev ID =0 ) and PANB (Dev ID =1)
PANA-Device Priority -100 ===>Active-Primary ----Dev ID =0
PANB-Device Priority -200 ===>Active-Secondary----Dev ID =1
Priroties assigned to the Device IDs for a certain Floating IP govern which Unit will own the Floating IP.
Floating IPs are tied to the priorities of the Device ID and not the Device Priority (Device>High Availability >Election Settings).
Lower priority takes precedence.
Configure floating IPs 192.168.50.254 and 192.168.50.253 on the interface eth-1/4 with Device ID =1 have lower priority than Device ID 0.
This will ensure that a floating IPs 192.168.50.254 and 192.168.50.253 will always stay active on Device ID-1 or Active Secondary.
IP 192.168.50.252 will always stay active on Dev-0 or Active Primary.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!