Adding ip to interface no coming up

Reply
L4 Transporter

Adding ip to interface no coming up

Hi

 

Okay i have an address object say ip-dgw

it was 10.21.18.129/24

 

its assigned to ae19.18 and also 10.21.18.7 & 10.21.18.71 - they are ip's attached directly to the interface.

This interface is ospf active

when i change ip-dgw to 10.21.18.1/24 it apply but when i look at the interface is /ip it says down. I can ping .7 and .71 but not .1

 

when i trying and ping from other devices i get an arp reply as i get the mac from the switch but no response.

 

I see nothing in the system monitor logs ...

 

I have done a quick check of the config can't find the ip address any where in there 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!