Aggregation of Ethernet from PA-5050 to Cisco Nexus 5K using L2 vPC

Reply
Highlighted
L3 Networker

Aggregation of Ethernet from PA-5050 to Cisco Nexus 5K using L2 vPC

Hey guys I am having an issue with a 2 x 10Gb (vPC) port-channel between two Nexus 5548s and a PAN 5050. I can get the port channel to come up on both switches, however I get around 25% packet loss when pinging over it. I have changed the port channel load balancing to src-dst-ip and have tried a couple different configurations on the cisco side with no resolve. As soon as I shut one side of the vPC down it cleans up.

PAN: 5.1.5

Nexus: 6.0.2

Both sides of the vPC are configured the same and show up.

  description PAN5050

  switchport mode trunk

  switchport trunk allowed vlan 128,135,159

  channel-group 201

  description PAN5050

  switchport mode trunk

  switchport trunk allowed vlan 128,135,159

  vpc 201

SW-1: 201   Po201(SU)   Eth      NONE      Eth1/1(P)

SW-2  201   Po201(SU)   Eth      NONE      Eth1/1(P)

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!