Application limit when pass FW

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Application limit when pass FW

L1 Bithead

Hello every one .

     I try to implement PA-500 on PAN-OS 4.1.6. Then I configure 2 security policies.

    1. security policy for deny bittorrent from both direction (Trust and Untrust zone) .

    2. security policy for allow all traffic both direction but enable AntiVirus, Spyware, Vulnerability and URL filtering on alert.

My environment for implement is

                                                          Brance ======= 40 MB ======= Data Center

Client == Switch ==Palo alto == Router == MPLS VPN COULD == Router == Switch==ACCPAC server

  

Then I try to test use applications found ACCPAC software (accounting software) slowly. After that I check by install bandwidth monitoring software and found the bandwidth behind PA-500 (14 Mbps) differrent in front of PA-500 (26 Mbps) about 12 Mbps at file size 146 MB.

     I check firewall troughput by command it shown about 30 Mbps.

     After that I try to disable AntiVirus, Spyware, Vulnerability and URL filtering (for disable threat prevention). Then test use ACCPAC again but result same before disable treat prevention .

     Then I try to use FTP application upload and down file to same server. I found behind PA-500 down/up speed 20 Mbps and in front of PA-500 down/up speed 39 Mbps.

     Note: The client machine run on Window XP operating system.

     Why traffic different between behind and in front of PA-500 in case traffic not over throughput spec?

     How to fix this problem or other solution for fix it. 

Manaschai S.

2 REPLIES 2

L6 Presenter

Verify speed/duplex being used for all links.

Also verify that routes are setup correctly in your PA-device (and stuff pointing to your PA-device).

Hello Miknad

     Thank you for reply.

     I check configure on PA-500 device all interface set auto both speed and duplex. Then I use CLI command for check all interface on PA-500 devices for speed/duplex. The speed/duplex of PA-500 and Switch  same  are 100 Mbps/Full duplex. After that I check routing it correct.

Manaschai S.

  • 1817 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!