Auto commit failed after upgrade to 8.1.0

Reply
L2 Linker

Auto commit failed after upgrade to 8.1.0

We upgraded the passive firewall on our Active/Passive HA firewalls from 8.0.19 to 8.1.0.
After installing the 8.1.0 image, firewall rebooted. After that, ethernet interfaces as well as HA ports didn't go UP.

 

We also got an error, that the auto-commit failed.

"Error: Max. user groups used in policy 1067 exceeds capacity (1000)"

Questions:

1. Ports didn't go up. Are they affected because the auto-commit failed? 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClQuCAK

2. Why we didn't get this error when we roll-back to 8.0.19 O.S.?

 

I've raised the issue to our vendor, but still waiting for a feedback. Hoping from feedback from the experts here in live community.

L1 Bithead

Re: Auto commit failed after upgrade to 8.1.0

Hello,

 

We did not have any issue last year when upgrading our HA cluster - but I would suggest you to make sure to read the prerequisites in the upgrade notes first.

 

Also, before upgrading, double-check that your "Dynamic Updates --> Applications and Threats" is up to date.

 

Lastly, based on my experience, the most stable version of 8.1 we ran were 8.1.4 and 8.1.10... maybe jumping directly to the last version will fix your issue.

 

R.

L7 Applicator

Re: Auto commit failed after upgrade to 8.1.0

Hello,

I agree going to 8.1.10 is the better choice of OS since it has a ton of fixes since the 8.1.0 code was released. If that doesnt fix your issue, I would say open a support case.

 

Regards,

L2 Linker

Re: Auto commit failed after upgrade to 8.1.0

I actually tried to upgrade the firewall to 8.1.9-h4, but I still got the same error code after the upgrade-reboot.
Port's don't go UP and the auto-commit process fails.

I'm still trying to reach out support from our vendor as we don't have direct support from PA.

Thanks for the suggestions.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!