Cisco WLC integration problem with PA.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Cisco WLC integration problem with PA.

L1 Bithead

I have Cisco WLC 5508 , kiwi syslogd and PA.I can see snmp traps in Syslogd but only username is visible , ip address of the client is missing.Can anybody help how to parse it in Palo alto Firewall.

 

Regards,

1 REPLY 1

L2 Linker

In the meantime you can avoid the use of a third party server and can directly send syslog events to your firewall.

 

The following command on WLC is everything you need:

 

logging syslog facility client associate enable

After that configure Palo Alto firewall as syslog server on WLC.

 

On Palo Alto firewall you should create a Syslog Parse Profile with the following entries:

Palo_Alto_Parse.png

 

Basically that's everything you need to get it running.

  • 3171 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!