Setting up portchannel from router to a pair of PA

Hi Guys,

I have a pair of PA5220s and a Cisco router ASR1001. I want to set up a port channel on the router and then spread the interfaces between 2 PAs. Each interface on the PA is set for virtual wire. I have done port channels between Cisco rout

Interface down due to internet down

Hi,

my PA220 interfaces were down due to internet connection is down. As the internet connection was up, the interfaces also showing UP. Why is this happening. is there any settings for this to check.

PCNSE certification, how to get an online training fully covering all the possible questions

Am confused by the amount of training available online. basically i want to get pcnse certification as fast as possible. how to do?

Issues with pushing out 10.2.9-h1

There is not a community discussion for issues implementing 10.2.9-h1

We have a maintenance window to push out 10.2.9-h1 Thursday evening and with recent issues with 1.2.7.h3 and other roll outs i am starting this thread for the community.

Scheduled Log Export -user keeps defaulting to admin

OS - 11.1.2-h3

Setting up the scheduled log export for traffic via scp - initial connection test OK. So I know ports are open etc...

We enter the username of the user for the SCP server that is going to be used and the password. As soon as you cl

Fast boot PA-450

I have a firewall that for some reason after doing a version update to 11.1 is only taking 2 to 3 min to boot now. I noticed all the logs were not showing up and the interfaces was showing down, but everything was working. I decided to do a factory r

Eve-NG Palo Alto VM ARP Issue

Does anybody encounter arp problems in eve-ng on palo firewall with pan-os 11 version ?  As an example, i have a small topology like clientA->routerA-> firewall<-routerB<-clientB , when i try to ping from clientA to clientB, clientA send ARP Request

Failed to initiate Plugin Phase1 commit

Anyone seen this before?

"Failed to initiate Plugin Phase1 commit"

Process logrcvr stopped (pid: -1) - Exit Signal: SIGSEGV

"debug software restart process log-receiver" did not fix it nor did a reboot.

PBF with Egress loopback interface

I may be going about this wrong, but here's what I'm trying to accomplish, and this is the way I thought I could accomplish it.

I need to route all traffic from a specific zone/subnet to a routing instance, and load balance egress, with the exception

CVE-2024-3400 IOC's

Hello All,

Its a twitter link but will try and summarize the process. 

https://twitter.com/cyb3rops/status/1781294529586331650