Custom Syslog sender From Cisco WLC

Reply
L4 Transporter

Custom Syslog sender From Cisco WLC

We have wireless users.Cisco WLC directly sends syslog to PA.We have to parse it correctly.But after doing we get the following

We also implemented agentless AD integration.We want users authenticated through AD could connect to some internal resources passing through FW.

But when we type show user ip-user-mapping all type SYSLOG

we see the following

Screenshot_6.png

L7 Applicator

Re: Custom Syslog sender From Cisco WLC

@Radmin_85,

Can you run 'show user ip-user-mapping ip <value>' replacing <value> with an IP address that should currently be mapped to a user. My guess would be that the parsing isn't setup correctly and the firewall is using the SSID, MAC, and the actual user recieved on the WLC as the user information when it parses the logs. 

Here's some guides, abeit old, that actually walk you through the process. 

https://live.paloaltonetworks.com/t5/Integration-Articles/Use-Syslog-Receiver-to-Integrate-with-Cisc...

https://supportforums.cisco.com/legacyfs/online/attachments/discussion/cisco_wlc_-_palo_alto_network...

L4 Transporter

Re: Custom Syslog sender From Cisco WLC

Screenshot_7.png

 

there is no mapping

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!