03-13-2012 09:56 AM
Hello,
I'm about to try to route dhcp traffic dhcp over my palo alto, but it does not work. Is there an equivalent of "helper-address" known on some routers. My client and my dhcp server are not on the same network, my palo is on the midle betwen my dhcp client and the server. thank you
03-13-2012 11:25 AM
Hi...If you install the PA device in vwire mode, the DHCP traffic should pass through. If the PA device is in layer 3 mode, you can configure DHCP server and/or relay to forward the DHCP requests. Thanks.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
