Failed to get CRL http:// ...

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Failed to get CRL http:// ...

L3 Networker

Im getting tons of failed to get CRL errors in my logs all of the sudden. Im not sure what I did (if anything) to cause this.

Ive tried to fix it,

  • I tried to enable  "Server CRL"
  • I did a nslookup on crl.verisign.com and I cant see any connections outbound being denied.

I cannot fix this.

Any sugestions on how to fix this?

What is this even for? I was not aware that the firewall was downloading any  CRLs, could it be part of SSL Decrypt? THe admin prior to me tries to get SSL Decrypt working but eh 4xxx serise do not support it (its broken/buggy)

Any help appreciated, thanks.

crl errors.JPG.jpg

4 REPLIES 4

L3 Networker

Need to ensure the Palo Alto can resolve these addresses as well as ensure that outbound connections from the device via the service route (management interface default) are allowed.  If this does not resolve your issue please open a support ticket.

L5 Sessionator

Hello Choff,

Please make sure service route for CRL updates to an ip address where it can communicate to internet.

Regards,

Hari Yadavalli

L5 Sessionator

Here's another approach. If it began to happen after you made some config changes and if you're not sure what was changed, maybe you can look at config log (Monitor => Logs => Configuration) to see if there's any corresponding change.

- Yasu

L4 Transporter

Hi,

we had the same issue. You have to create a new firewall policy allowing the MGT interface of the PA to download the CRLs.

Take a look how we solved it:

2.JPG.jpg

With a custom URL category we allowing the crl sites:

1.jpg

So you have check the system logs and enter each URL in the custom URL category.


  • 3054 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!