PA 500 in 5.0.4 and GP client 1.2.3
Would like to be sure, I need GP auto connexion from outside of my network and no GP in my network.
Then configure my external gateway, my internal host detection. It works well.
But short question do I need the GP license for that ? Normally no, just one gateway, no HIP then no license ....
During my test, it seem that despite the iternal host detection, when users are internal, GP try to create the Tunnel connexion .....
Make sens for you ?
Solved! Go to Solution.
As I know you don't need a license for enforcement.
did you check if internal host ip is a good choice ?
Internal Host Detection
This option is used to determine whether the host is inside or outside of the corporate network. Once this is determined, the agent will connect to the corresponding Gateway.
If “Internal Host Detection” is enabled, the DNS name entered specifies a hostname that can only be reached from internal network and its IP address. The agent performs a reverse lookup on the IP address and if it receives the expected hostname as a response, it will attempt to connect to the gateways in the internal gateway list. If no response is received, the agent will attempt to connect to the external gateways in the external gateway list.
Thx all for your help.
I would like to have auto connect from user's laptop when they are outside of my network.
What's happen if I don't configure host side detection ? When peaple are on my network, GP will try and try and try ... to connect ?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!