GUI shows interface CLI shows Int not found

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

GUI shows interface CLI shows Int not found

Cyber Elite
Cyber Elite

Web gui shows interface eth1/23

 

But cli

 

show interface ethernet1/23

Server error : Interface 'ethernet1/23' not found

 

show system state | match capa
cfg.general.is-admin-login-saml-capable: False
peer.cfg.general.is-admin-login-saml-capable: False
sys.s1.ha1.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p1.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p10.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p11.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p12.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p13.capability: [ auto, 1Gb/s-full, ]
sys.s1.p14.capability: [ auto, 1Gb/s-full, ]
sys.s1.p15.capability: [ auto, 1Gb/s-full, ]
sys.s1.p16.capability: [ auto, 1Gb/s-full, ]
sys.s1.p17.capability: [ auto, 1Gb/s-full, ]
sys.s1.p18.capability: [ auto, 1Gb/s-full, ]
sys.s1.p19.capability: [ auto, 1Gb/s-full, ]
sys.s1.p2.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p20.capability: [ auto, 1Gb/s-full, ]
sys.s1.p21.capability: [ auto, 10Gb/s-full, ]
sys.s1.p22.capability: [ auto, 10Gb/s-full, ]
sys.s1.p23.capability: [ auto, 10Gb/s-full, ]************************************************

MP

Help the community: Like helpful comments and mark solutions.
1 accepted solution

Accepted Solutions

Yes. There's nothing to display if the interface is unconfigured.

 

Technically the GUI doesn't display anything either if it's unconfigured. It has a line item to let you actually configure it when ready, but every column is empty. 

 

It's the same with CLI. Your "show interface" shows only the actually configured interfaces (much like the columns in the GUI) where the system state shows all possible interfaces (like the interface names in the GUI). 

 

Think of that CLI output of showing the columns of the GUI for the interface. If there's nothing to display, there's nothing that will be displayed.

View solution in original post

4 REPLIES 4

It looks like this interface is not configured.

 

Have you commint and changes on this interface?

What colour is shown under the GUI for this interface?

 

 

So is it by design if interface is not configured it will not show up in CLI?

MP

Help the community: Like helpful comments and mark solutions.

Yes. There's nothing to display if the interface is unconfigured.

 

Technically the GUI doesn't display anything either if it's unconfigured. It has a line item to let you actually configure it when ready, but every column is empty. 

 

It's the same with CLI. Your "show interface" shows only the actually configured interfaces (much like the columns in the GUI) where the system state shows all possible interfaces (like the interface names in the GUI). 

 

Think of that CLI output of showing the columns of the GUI for the interface. If there's nothing to display, there's nothing that will be displayed.

Many Thanks for answering the question

MP

Help the community: Like helpful comments and mark solutions.
  • 1 accepted solution
  • 3255 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!