HA Link and Path Monitoring

L7 Applicator

Re: HA Link and Path Monitoring

1. pre-emption does not take any monitors into account. It is designed to assume a network outage is either a very temporary issue (fail back upon timer) or a very lengthy issue (fail permanently and wait for admin)


2. if the outage has taken longer than the (hold time x pre-emption attempts), the cluster will settle with the secondary being active until an admin takes action. to manually fail it back, you shourd first ascertain the primary's root issue is solved and then shortly suspend the secondary


3. the default preempt hold time is 1 minute [1-60], but is configurable if you access the advanced timer settings

'Flaps Max' indicates how many times preempt is allowed to 'try' before permanently failing, and is 3 by default [0-16]

preempt hold time.png

L4 Transporter

Re: HA Link and Path Monitoring

MAny Thanks for replying back in detail.

Lot to learn from here

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!