May I know where is the document that refer to this? Can I even ping the mgt ip via trusted port? Thanks all!!
Solved! Go to Solution.
To factory reset the device, you will need to use cli:
1. repower device, monitor the boot sequence for the following message:
"Autoboot to default partition in 3 seconds.
2. Select m to boot to maintenance partition
3. From the maint partition select 'factory reset".
4. At this point you will be prompted for a password, enter "MA1NT"
6. You must allow the device to complete the boot sequence
(Note: Once you do that, the default username / password will be: admin / admin)
Thanks for the response... the related document on resetting the device to factory config is here:
Please note that if you are trying this on PANOS 4 you need to type maint for step 2 instead of m.
right, for PANOS 4 type the complete word "maint" and I suggest to reboot the device after the factory rest boot, oftet whit my PA-500 the first time the GUI interface is not responding, only a second reboot resolve the issue.
default mgm ip 192.168.1.1/24 (no dhcp server) admin:admin
the reboot after a factory default reset will typically take longer than other reboots.
I usually do a factory reset just before lunch time so that when I get back from lunch the boot process has had time to complete.
I followed all steps and pressed the space bar to stop the PA-220 from loading so I can enter the Maint screen but still going to main loging which we do not have. My old company lost the contract and the new company which they kept me as IT manager left with one firewall that I am trying to use again. The S/N: 012801013483
I am using putty to connect through the console port but no luck so far.
Is there any other ways to do that please?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!