- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
06-19-2016 05:58 AM - edited 06-19-2016 09:05 AM
Hi Guys,
What is going to be a right way/steps to downgrade PA from the version mentioned above?
1) Disable "preemption" on the both nodes. Commit changes.
2) On the "passive" node load config that matches your version. Let say l am going to install 7.0.1. So config has to be compatible with this version. Install and reboot.
3) Passive back online. Active will try to sync config to passive where PAN-OS is different and also configuration is not compatible.
Can I prevent this synchronisation somehow so l can then suspend Active and do the same steps as before to passive to match PAN-OS and config version.
All feedbacks are welcome
Thanks
06-20-2016 09:59 AM
Under HA configuration uncheck the option which is enable config sync.
06-20-2016 09:59 AM
Under HA configuration uncheck the option which is enable config sync.
06-20-2016 10:27 AM - edited 06-20-2016 11:54 PM
Hiya,
Spot on mate. Any other suggestions/recommendations.
Cheers
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!