How to view SFP installed on a Panorama or Logcollector

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.
Palo Alto Networks Approved
Palo Alto Networks Approved
Community Expert Verified
Community Expert Verified

How to view SFP installed on a Panorama or Logcollector

L2 Linker

Does anyone know how to view the sfp installed on an m500/600 panorama or log collector?

 

I have tried the below command and even put a wildcard on it but it only gives me hard drive info.

 

> show system state filter sys.sX.pY.phy

 

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

@PktBlocker 

 

As per PA this is not possible right now.

We can do the feature request to PA via Sales Engineer of PA.

 

Regards

MP

Help the community: Like helpful comments and mark solutions.

View solution in original post

11 REPLIES 11

Cyber Elite
Cyber Elite

please try below link

 

https://live.paloaltonetworks.com/t5/Operations-Documentation/810-000096-00E-Reference-Transceiver-H...

 

 

MP

Help the community: Like helpful comments and mark solutions.

thank you for the transceiver list but the question is "How to view SFP installed on a Panorama or Logcollector ?"

Maybe try a match instead of a filter? That might get you the info also.

show system state | match phy

tried that and got nothing. I think the way they monitor interfaces on this chassis is different than the firewalls.

might be need to see if someone replies here.

MP

Help the community: Like helpful comments and mark solutions.

i tried on panorama 

 

show system state filter sys.s1.p*.phy

'sys.s1.p*.phy': NO_MATCHES

MP

Help the community: Like helpful comments and mark solutions.

running the command noted will not produce the interfaces on the panorama or log collector, this is why you show a NO_MATCHES. Hopefully someone from PA will chime in with some knowledge on the topic.

L2 Linker

can someone from PA please provide a solution to this?

Hello @PktBlocker ,

 

Since Log Collectors and Panoramas are different from a normal firewall, try using the following command to see if this helps:

 

show system state filter net.s*.eth*.*

 

This should show the entire ports of said Panorama/Log Collector.

 

I hope this helps.

Don't forget to Like if you find this post helpful

Cyber Elite
Cyber Elite

@PktBlocker 

 

As per PA this is not possible right now.

We can do the feature request to PA via Sales Engineer of PA.

 

Regards

MP

Help the community: Like helpful comments and mark solutions.

L2 Linker

so i got this command from PA support but it does not show any detail like what SFP was installed, etc. We as PA customers should not have to ask for a troubleshooting command to work. It should work just like it does on the firewalls.

 

> show system state filter net.s0.eth*
> show system state filter net.s0.eth4*

 

net.s0.eth4.dhcp-dns: { }
net.s0.eth4.dhcp-ntp: { }
net.s0.eth4.dhcp-opcmd: 3
net.s0.eth4.dhcp-options: { }
net.s0.eth4.hwcfg: { 'advertised': [ ], 'link': Up, 'mode': Force, 'setting': 10Gb/s-full, }
net.s0.eth4.stats: { 'rx-bytes': 8554201114194, 'rx-compressed': 0, 'rx-drop': 378483, 'rx-errs': 358, 'rx-fifo': 0, 'rx-frame': 358, 'rx-m ulticast': 488251, 'rx-packets': 6191837675, 'tx-bytes': 10742051800052, 'tx-carrier': 0, 'tx-colls': 0, 'tx-compressed': 0, 'tx-drop': 0, 'tx-errs': 0, 'tx-fifo': 0, 'tx-packets': 16544900691, }

  • 1 accepted solution
  • 6074 Views
  • 11 replies
  • 1 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!