Interface Settings at VM-Series

Reply
L4 Transporter

Interface Settings at VM-Series

Cannot set any network interface advanced setting at a VM-series (VM300):

1-13-2014 11-13-28 AM.png

the fields are gray out... why?

L7 Applicator

Re: Interface Settings at VM-Series

Hello Sir,

This is an expected behavior from a VM series firewall. Link speed and duplex are not relevant for a virtual interface and do not need to be checked. That's why those 2 options ( Link-Speed, Link-Duplex) are gray out.


Please follow below mentioned documents for more information.

VM-Series Troubleshooting  ( See page No-7)


Hope this helps.


Thanks

Highlighted

Re: Interface Settings at VM-Series

You can't set Link Speed or Duplex on your ESX vSwitch.

This is why you can't/need to configure Speed or duplex in your PAN-VM

Regards

Marco

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!