Interface problème whene using aggregate with PAN-OS 3.0.10

Reply
Highlighted
L3 Networker

Interface problème whene using aggregate with PAN-OS 3.0.10

Hi,

Whene triying to configure tow interfaces(eth1/17 and eth1/18) on a PAN-4020 device in an aggregate interface the interface eth1/18 never goes up. Whene switching the same cable on the eth1/19 all things works well. I have incountred this problem on tow PAN 4020 devices always the issue is with the eth1/18 if. I'am using PAN-OS 3.0.10.

Any idea please?

Regard's

Tags (1)
Highlighted
L3 Networker

Re: Interface problème whene using aggregate with PAN-OS 3.0.10

Arnaud Bresnard has opened case 20173 for this issue. Can you send a tech support so we can analayze your interface configuration?

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!