Is there a way to disable specific traps in PAN?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Is there a way to disable specific traps in PAN?

L2 Linker

I have a long open issue with PAN TAC where the PAN 5060 is sending traps when detecting an issue with HA secondary availability. The HA is fine so these messages are just spam for practical purposes.  Is there a means to disable these specific traps?

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

@Shuttermed,

Sure. Within your firewall's Log Settings configuration under system you should have a configuration specifying when the device should send a Trap. Within the configuration you'll simply and to make something like the following, just specify the proper filter for the event you want to supress.

Capture.PNG

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

@Shuttermed,

Sure. Within your firewall's Log Settings configuration under system you should have a configuration specifying when the device should send a Trap. Within the configuration you'll simply and to make something like the following, just specify the proper filter for the event you want to supress.

Capture.PNG

  • 1 accepted solution
  • 2691 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!