LACP with Cisco ACI 3.1

Reply
Highlighted
L3 Networker

LACP with Cisco ACI 3.1

We've noticed that LACP doesn't work consistently and properly for Aggregate Ethernet interfaces between Palo Alto Networks firewalls (all running PAN-OS 8.0.6-h3) and Cisco ACI 3.1 switch hardware.  On the PAN-OS side, I've got LACP set to active mode, slow transmission, no fast failover.  On the Cisco ACI side, it doesn't work when set to LACP "active".  It says it isn't getting LACP PDUs.  It has to be set to LACP "on" for it to work correctly and consistently.

 

Does this mean that Palo Alto Networks doesn't have a proper implemenation of LACP active in PAN-OS 8.0.6-h3?  Just curious.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!