LSVPN configuration Question

L4 Transporter

LSVPN configuration Question

In order to register with the LSVPN, each satellite must establish an SSL/TLS connection with the portal. After

establishing the connection, the portal authenticates the satellite device to ensure that is authorized to join the


Just want to understand what exactly packet exchange they do when satellite office authenticates with portal and gets config.

Thanks in advance.

Message was edited by: Mandar Kulkarni

Tags (1)
L2 Linker

Re: LSVPN configuration Question


The screenshot above is a packet capture when the Satellite establishes communication with the portal. Hope this is close to what you are looking for.


Sylvester O.

L4 Transporter

Re: LSVPN configuration Question

this capture was taken from which  device / interface.

L6 Presenter

Re: LSVPN configuration Question

Hi Madan,

Its a SSL connection, message exchange happens inside SSL connection. We dont have information for any PANW specific message exchanges.

Config is downloaded as SSL Data.


Hardik Shah

L3 Networker

Re: LSVPN configuration Question

Hello Mandar

This capture was taken on the Satellite device.

Satellite :


The capture in question was taken on the Palo alto device using the filters given in the screen shot below.

You should be able to see the exchange on the firewall stage packet capture.

Hope that helps.




Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!