Migrating configuration from Panorama VM to a M-100

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Migrating configuration from Panorama VM to a M-100

L4 Transporter

What would be the required steps for migrating from PAN-VM to a M-100?


1 accepted solution

Accepted Solutions

L4 Transporter

You should be able to export the config from the Panorama VM and import it to the M-100 with no issues. Configuration like the Collector groups, managed collectors, preference lists may need to be configured after loading the VM's config to the M100 for log forwarding.

1.Save and export the Panorama VM config

2. You may edit the device IP address and hostname on the xml file and import this to the M100.

3. Load the imported config file to the M100 and commit.

4. Configure Managed log collectors and Log collector groups for log forwarding from devices.


Once migration is complete, configure the firewalls to point to the M100 for log forwarding.

Please refer to the below articles as well:

https://live.paloaltonetworks.com/docs/DOC-5057

https://live.paloaltonetworks.com/docs/DOC-4207

View solution in original post

2 REPLIES 2

L5 Sessionator

Hello ,

Please refer to the following document from Page 38-44 for migrating from Panorama VM to M100:

Panorama Administrator's Guide 5.1

Regards,
Kunal Adak

L4 Transporter

You should be able to export the config from the Panorama VM and import it to the M-100 with no issues. Configuration like the Collector groups, managed collectors, preference lists may need to be configured after loading the VM's config to the M100 for log forwarding.

1.Save and export the Panorama VM config

2. You may edit the device IP address and hostname on the xml file and import this to the M100.

3. Load the imported config file to the M100 and commit.

4. Configure Managed log collectors and Log collector groups for log forwarding from devices.


Once migration is complete, configure the firewalls to point to the M100 for log forwarding.

Please refer to the below articles as well:

https://live.paloaltonetworks.com/docs/DOC-5057

https://live.paloaltonetworks.com/docs/DOC-4207

  • 1 accepted solution
  • 3184 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!