Multiple overlapping IP customers behind IPSEC tunnels

Reply
L1 Bithead

Multiple overlapping IP customers behind IPSEC tunnels

Hello,

 

I have two customers with the same IP subnet, both behind separate IPSEC tunnels to my London hub (image attached, apologize for poor quality). Is it possible they can connect to my hub without any NAT on their side ? 

I've done a hack I don't like it works. By enabling ECMP and 'symmetric return' option the traffic is flowing from both customers Ireland and Frankfurt without problems - but I don't like it. 

 

Second question applies to the traffic in opposite direction - from my hub to the clients. Is there any option to enable the traffic without involving the customer ? I assume there is not much we can do in this case - the customer has to do proper NATs their side.

 

Thanks a lot for replies !

 

IMG_6826.JPG

L7 Applicator

Re: Multiple overlapping IP customers behind IPSEC tunnels

You are correct, the real solution to this will be NAT on the remote side of the IPSEC tunnel.

 

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center
L1 Bithead

Re: Multiple overlapping IP customers behind IPSEC tunnels

What about if I put each customer into a separate Virtual System and NAT them in their vsys. Would that work too ? I thought about this yesterday and my gut feeling is it should work.

L7 Applicator

Re: Multiple overlapping IP customers behind IPSEC tunnels

Hello,

Splitting them up that way will also work since you are logically splitting up your PAN. However here is a good document about the original question.

 

https://www.paloaltonetworks.com/documentation/10/cloud-services/globalprotect-cloud-service-gsg/gpc...

 

Regards,

Tags (2)
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!