Hello, im trying to set up a NAT rule for a PPTP VPN tunnel.
I have set it up like this:
Dest. zone: untrust
Source address: Any
Dest. address: lets say 184.108.40.206/32
Source Translation: None
Source address: Geo Location:NO,EU
Application: PPTP(iv tried this and..)
I can see in the traffic in the traffic logs, so there are signs of the traffic.
This is the logs from the PPTP server/router:
Aug 11 08:07:59 pptpd: CTRL: Client 220.127.116.11 control connection started (Client IP)
Aug 11 08:07:59 pptpd: CTRL: Starting call (launching pppd, opening GRE)
Aug 11 08:07:59 pptp: Plugin pptp.so loaded.
Aug 11 08:07:59 pptp: PPTP plugin version 0.8.5 compiled for pppd-2.4.7, linux-18.104.22.168
Aug 11 08:07:59 pptp: pppd 2.4.7 started by MY USERNAME, uid 0
Aug 11 08:08:00 pptp: Using interface pptp0
Aug 11 08:08:00 pptp: Connect: pptp0 <--> pptp (22.214.171.124)
Aug 11 08:08:29 dnsmasq-dhcp: DHCPREQUEST(br0) 192.168.2.199 00:23:c1:03:d2:24
Aug 11 08:08:29 dnsmasq-dhcp: DHCPACK(br0) 192.168.2.199 00:23:c1:03:d2:24
Aug 11 08:08:30 pptp: LCP: timeout sending Config-Requests
Aug 11 08:08:30 pptp: Connection terminated.
Aug 11 08:08:30 pptp: Modem hangup
Aug 11 08:08:30 pptp: Exit.
Im not sure what im doing wrong, any help would be great.
What are you trying to NAT? The description has the same destination translation as destination address.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!